OBT BROADCAST EQUIPMENT PRODUKSI PEMANCAR FM BERKUALITAS MULAI 30WATT S/ D 10KW . BRANDED ITALY ( RVR BLUES 30 , RVR TEX30 LCD , RVR TEX300 LCD RVR PJ 300C LCD , RVR PJ 500C LCD , STL SINTECK , EXCITER SINTECK ) ( EXCITER, BOSTER MOSFET/ TUBE , KIT PLL 87 S/ D 108 MHZ LCD 5WATT, PLL 15 WATT KIT STEREO ENCODER , KIT PA FM 25 , 40, 80 , 250 WATT , 400WATT , 600 WATT , 1500 WATT , STL UHF/ VHF )  AUDIO STUDIO , ( MIXER BEHRINGER , AUDIO PROCESSOR ) ANTENNA SIRRA, OMB, VEE , YAGI , SPIDER , MS1 POWER DEVIDER , TOWER GUYED WIRE, SELF SUPPORTED HELIAX CABLE ANDREW , LEONY , RFS 1/ 2 , 7/ 8 , RG 8 50 OHM BELDEN 9913 , 75 OHM BELDEN 9292 , CABLE JAMPER CONNECTOR TYPE N , DIN. TEST EQUIPMENT FREQUENCY COUNTER , SPECTRUM ANALYZER WATT METER, SWR METER BIRD, DAIWA, ANTENNA ANALYZER MFJ 269 SIGNAL GENERATOR , RF FIELD STRENGTH ANALYZER , LC METER , DUMMY LOADS 5 WATT S/ D 5KW, OMBHOT JL.RAYA MALANG BELAKANG PASAR KASEMBON NO.09 MALANG JAWA-TIMUR HP.081318459472 EMAIL : ombhot@ gmail.com   PRODUK  PEMANCAR FM

DUMMY LOAD 1.5 KW MFJ -264

DUMMY LOAD 1.5 KW MFJ -264

Description: You get SWR below 1.3 to 650 MHz and 1.1 at 30 MHz. Handles 100 Watts for 10 minutes, 1500 Watts for 10 seconds. It has a strong lightweight aluminum construction. The MFJ-264 Dry Dummy Load measures 3Wx3Hx9D inches and comes with MFJ’ s famous No Matter What one year limited warranty.

 Specifications

 IMPEDANCE: 50 OHMS VSWR: Less than 1.3: 1 at less than 650 MHz

 POWER DISSIPATION: 1500 Watts for less than 10 seconds — 100 Watts for 10 minutes

 VOLTAGE GRADIENT: 10 kV / inch

 OPERATING TEMPERATURE: Up to 350′ C

 FREQUENCY RANGE: 1-650 MHz; usable to 750 MHz

RVR TEX300LCD

RVR TEX 300 LCD/ S FM Transmitter

 Broadcast quality at a value price, can be used as drivers for medium power FM stations or as stand-alone applications. Compact, non-deformable and light, 2HE rack unit, stainless steel chassis.

 High performance integrated stereo coder, with L& R Mono and MPX inputs and 2 SCA / RDS signal inputs. Continuously adjustable output power from 0 to maximum power with automatic APC control and Foldback protection.

 Safe operation in any working conditions. Completely microprocessor-controlled easy to program from the menu or via RS232, all main parameters can be read on the LCD display.

 Possibility to be monitored through all RVR telemetry systems to guarantee simple remote control of the operating parameters. Manufactured using SMD technology and composed of only 4 modules.

 Maximum operating reliability designed to allow an easy maintenance.

 Universal multi-voltage power supply from 80 to 260 V with no preselection.

 Modern technology that complies with all EC, FCC and CCIR standards.

 Audio Input Connectors XLR Balanced

 Stereo seperation > 50 dB ( typical 60)

 Frequency Range 87.5 – 108 MHz

 Power 0-300 Watt Adjustable

 Frequency Selection Front Panel control menu

 Frequency Control Type Direct Carrier Frequency

 Harmonics

RVR TEX 30

RVR TEX 50 LCD/ S Stereo Transmitter Broadcast quality at a value price, can be used as drivers for medium power FM stations or as stand-alone applications. Compact, non-deformable and light, 2HE rack unit, stainless steel chassis. High performance integrated stereo coder, with L& R Mono and MPX inputs and 2 SCA / RDS signal inputs. Continuously adjustable output power from 0 to maximum power with automatic APC control and Foldback protection. Safe operation in any working conditions. Completely microprocessor-controlled easy to program from the menu or via RS232, all main parameters can be read on the LCD display. Possibility to be monitored through all RVR telemetry systems to guarantee simple remote control of the operating parameters. Manufactured using SMD technology and composed of only 4 modules. Maximum operating reliability designed to allow an easy maintenance. Universal multi-voltage power supply from 80 to 260 V with no preselection. Modern technology that complies with all EC, FCC and CCIR standards. Audio Input Connectors XLR Balanced Pre-Emphasis 50 / 75 uS Selectable Stereo seperation > 50 dB ( typical 60) Frequency Range 87, 5 – 108 Mhz Power 0-50 Watt Adjustable Frequency Selection Via LCD Menu Frequency Control Type Direct Carrier Frecuency Harmonics

RVR BLUS 30NV

RVR Blues 30 NV 30 Watt Stereo FM Transmitter All of RVR Experience in this new ultracompact FM Exciter! Broadcast quality, reliable and at a value price, extremely compact, ideal for STL stations and multi-channel applications via cable. State-of-the-art audio quality for perfect reproduction, fully compliant with FCC, CCIR and all international regulations. Microprocessor-controlled, easy to programme from the menu or via RS232, all main parameters can be read on the LCD display.Integrated high performance stereo coder, L& R inputs, MPX and auxiliariesfor SCA / RDS signals. Output adjustable between 0 and 30 W automatic APC control andFoldback protection, safe operation under all operating conditions.Made using SMD technology, fully solid state, MOSFET RF amplifiers.Ultracompact, non-deformable and light, 1HE rack unit, stainless steel chassis, only kg 6 Maximum operating reliability and stability designed to minimise spare parts. Broadcast quality, reliable and at a value price State-of-the-art audio quality for perfect reproduction Microprocessor-controlled, easy to programme from the menu or via RS232, all main parameters can be read on the LCD display Integrated high performance stereo coder Output adjustable between 0 and 30 W automatic APC control and Foldback protection, safe operationunder all operating conditions using SMD technology, fully solid state, MOSFET RF amplifiers Ultracompact, non-deformable and light, Audio Input Connectors XLR Balanced Pre-Emphasis 0, 50 and 75 uS Pilot output Yes, BNC Stereo seperation > 50 dB ( typical 60) Frequency Range 87.5 – 108 MHz Power 0-30 Watt Adjustable Frequency Control Type Direct Carrier Frecuency Harmonics

PALLET BOOSTER 600WATT BLF574

600W BLF574 FM Pallet

 600W Single Mosfet FM Amplifier # 86-110MHz # 43-50 Volts @ 15 – 17.5ADC # BLF574 50volt LDMOS Technology. # Input/ Output 50 ohms # Pout 600W min. 2 watt input. # P1dB greater than 650W # 25 dB gain minimum. # Class B push-pull. # Temperature compensated bias designed by NXP. # Compact size; LxWxH 4.0 x 2.25 x 1.5 inches # Standard 1/ 4 inch copper base

PALLET BOOSTER 300WATT BLF278

 300W FM Amplifier

 [ FM300]

 Designed for FM radio transmitters, this amplifier incorporates microstrip technology and MOSFET transistor to enhance ruggedness and reliability. * 86-110MHz * 48 Volts * BLF278 MOSFET * Input/ Output 50 ohms * Pout 300W with a 2.5 to 3 watt input. * Low distortion Class B push-pull. * Compact size; LxWxH 4.0 x 2.0 x 1.5 inches

PALLET BOOSTER 500WATT 2X BLF278

500W FM Pallet

 [ FM500]

 Designed for FM radio transmitters * 86-108MHz 48Volts * Input/ Output 50 ohms * Pout 500W minimum with a 6-8 watt input * Power requirements 17 Amps @ 48 volts, 500 watts out

AUDIO PROSESOR MDX 2600

COMPOSER PRO-XL MDX2600

 [ MDX2600]

 COMPOSER PRO-XL MDX2600 Interactive Reference-Class 2-Channel Expander/ Gate/ Compressor/ Peak Limiter with Integrated De-Esser, Dynamic Enhancer, Tube Simulation and Low Contour Filter Whether

SINTECK STL TX & RX ANTENNA

Sinteck STL TX+ RX + Antenna

 [ Strider Link]

 * Externally Sinthesized, more than 100 channels! * 10W RF output * 130 to 500MHz, bands of 5MHz * Stereo generator, digital filter and audio processor cards available * Hi-Fi VCO section, more quality in events transmittings * SCA/ RDS interface * STL or RPU uses * low internal temperatures * 12V battery connection

ANTENNA SIRRA

Antenna sirra

 - alumunium boom ukuran 1 1/ 4 “

 - elemen alumunium ukuran 1 1/ 4

 - isolator teplon

 - konektor type N female

 - maksimal load power 600 watt/ ba

POWER SWITCHING 12 V 25 AMPER

Switching PSU 12V-8A

 100W Switching Power Supply S-100-12 AC input: 220V + / – 15% DC output: 12V 8.4A ( voltage adjustment)

LPF 800WATT

LPF 800W[ LPF800]

 This is our economical high power low pass filter. This model is intended for use with our 300W, 350W, 600W and 700W pallet amplifiers. * 86-110MHz * 0.25 dB insertion loss maximum; 0.20 dB typical. * -22dB return loss maximum; -25dB typical. * Metal clad silver teflon caps from Semco. * # 8 Awg Inductors. * -60dB rejection at 176MHz. That’ s the 1st harmonic of 88MHz * Size: 3 inches wide x 7 inches long. * Each unit is sweep tested on an HP 8753D network analyzer to meet our specifications.

LPF250 WATT

250W Low Pass Filter

 [ LPF250]

 25dB maximum insertion loss, better than -20dB return loss from 88-108MHz. Maximum insertion loss occurs at 108MHz. # RF connectors are not included. A coax can be soldered directly or PC mount N connectors may be used. We do offer an aluminum enclosure for this filter: Visit this page: Aluminum Enclosure # The components used are Semco 500V metal cased micas and # 14 awg machine wound inductors. This design is based on an Elenos exciter output section. # Mounts to customers chassis with 8-32 screws. 1/ 4 inch PCB standoffs or washers are required between the bottom of the PCB and chassis. Installing the filter in a metal chassis is suggested to provide shielding and good thermal conductivity in high power installations. # This low pass filter is best suited for our 15, 45, 80, 150 and 175W pallets. # This low pass filter is intended for use in 50 ohm systems only

SPLITTER COMBINER

1000W Teflon Splitter/ Combiner Set

 [ COMBINER 100]

 1000W Teflon Splitter/ Combiner Set ( 2 PCB splitter/ combiner, 1 R100 5W, 1 R100 250W) Designed for FM radio transmitters, these Teflon splitter combiner assemblies are ideal for splitting and combining FM signals in the 88-108MHz frequency range. * Specifically designed for combining 2 RF amplifiers or driving 2 antennas. * 1000 watt power rating. * 0.12dB maximum power loss. * PCB measures 4.94 inches x 3.18 inches. * 250 watt 100 ohm power balancing resistor. * PCB is Teflon with ceramic filler; 2oz copper. Tightly controlled dielectric constant. * Non-reactive; this means you can use 3 boards to create a 4 way combiner! ! ! ! * Guaranteed not to burn under high SWR conditions. The splitter combiner set includes 2 Teflon Combiner PCB’ s and 2 resistors as shown here. The axial leaded resistor 100 ohms 5 watts is ideal for low power situations like at the input of a pair of pallet amplifiers.

MPX PRO 8M

MPX Pro 8M [ MPX Pro 8M]

 Professional stereo encoder with 8x sampling, fr-4 double side standard industry pcb, compact design 7x12cm pcb size, best solution high quality stereo coder for your FM transmitter

PLL 15WATT

KIT PLL FM BROADBAND 5 WATT

Broadband 88-108MHz – High quality double side PCB – 76-108MHz range frequency – Fet oscillator with PLL system – New generation final fet 5W ( min.) – Manual power out adjustment – Easy change frequency with up/ down switch – Lock indicator – LCD Display